Yes you can open Google Drive and google files using IFP
Please check the following link for information about Bytello Data Privacy and GDPR: https://www.bytello.com/gdpr
Check your firmware and wireless network settings: Check that the IFP is at latest firmware Ensure you are using the latest version of Bytello Share on the devices and the IFP Check the wireless network and environment. Check for wireless interference (metal objects, too many wireless devices, etc.). Check for too much wireless network traffic. Try enabling Hotspot mode on the IFP so you don't need to connect through the facilities wireless network and go direct (Settings/Wi-Fi/Hotspot to enable – please check if this is OK with your IT Administrator) Try a wired network connection and see if you get disconnects Do a wireless site survey in their facility to see if their Wireless network is stable
https://ssp.bytello.com/download
Turn the IFP device OFF and unplug the power cable. Spray a screen cleaner (non-abrasive, non-alcohol, non-ammonia detergent spray) on a microfiber cloth (do not spray directly on the IFP display) and wipe the surface without applying too much pressure. Let the IFP dry before reconnecting power and turning it back on.
Check the Admin menu for debugging, administration of settings, and troubleshooting. Download it here.
There are the following type of locks that users can enable:
Touch Lock - enabled or disabled in the IFP Admin menu, or by using the red button on the remote control to lock it (pressing red button again unlocks it).
USB Lock - enabled in the IFP Admin menu - Android setting - USB key lock, unlock it by pressing the remote red button or USB unlock file.
Lock Screen password - enabled in the Android settings - System - Lock Screen password (as the picture below), unlock it by using the PIN code when you enabled it or you can reset the password by pressing "0214" on the remote.
Advanced Lock password - enabled in the Android settings - System - Lock Screen password. There are some settings if you want only accessed by admin user. Here is the key file. Please put the file on the root directory of a FAT32 formatted USB disk and plug into the USB port of IFP.
Bytello Share Network Requirements The TCP ports below handle device connection: TCP 7385, 29736, 2067, 39458 The TCP/UDP ports listed below handle the transfer of functions within the device application (media/photo/camera, remote/mouse control, desktop sync, and one point of touch during screen share): TCP 49200-49400 - Media and Desktop Synchronization UDP 49200-49400 - Remote/Mouse control and touch Chromecast and the Chrome Web Store App use the following: TCP 8008, 8009, 8010+ until an available port is found UDP 49400-49450 Airplay uses TCP 5000 and 7000 Airplay and Chromecast use UDP 5353 Miracast uses TCP/UDP 7236 and UDP 21200 and 21201 Web browser for Bytello DMS console Devices for Bytello DMS client
Check your firmware and wireless network settings: Check that the IFP is at latest firmware Ensure you are using the latest version of Bytello Share on the devices and the IFP Check the wireless network and environment. Check for wireless interference (metal objects, too many wireless devices, etc.). Check for too much wireless network traffic. Try enabling Hotspot mode on the IFP so you don't need to connect through the facilities wireless network and go direct (Settings/Wi-Fi/Hotspot to enable – please check if this is OK with your IT Administrator) Try a wired network connection and see if you get disconnects Do a wireless site survey in their facility to see if their Wireless network is stable
IFP has Kiosk mode that basically removes the app bar so there is no short-cuts to different application ideal for KIOSK type setup where admin’s don’t want user’s to do more. Instruction is: Using the remote control, press "menu" ,"7", "9", "1", "3" - the sidebars will toggle on/off.
The Screen Record app can be found in the menu here:
This allows you to make an MP4 video when you start the recording. You can then save this file to the IFP and transport it to a USB Drive or Cloud Drive in the MP4 format for viewing on any system.
We provide manual for Bytello Screenshare. Other pre-installed software will either have help files or youc an review our how to video page
https://www.youtube.com/@AKTIMA-Interactive
If you want to switch between traditional toolbar, floating toolbar, and gesture based navigation, you can do it in the settings: Go to: Settings>System>Gestures
This feature is inbuilt and cannot be turned off. If not needed, user doesn't need to use it. However, perhaps if the intent is to have limited application for user to interact, the IFP does have KIOSK mode which will disable the floating bars on the sides and intended for this type of use case. Please consult the FAQ on how to enable KIOSK mode.
Yes, it is tempered glass
All IFP models (IFPxx01/02/03 models) can do this. See here (IFP to IFP screen sharing): here is the video.
https://www.youtube.com/@AKTIMA-Interactive
You should be able to install Microsoft Company Portal app and set up the IFP as a BYOD device.
ف
Contact Us
HEADQUARTER
Location:
241 Gesr El-Suiz ST.
Masr El-Gedida ,
Cairo, Egypt
This allows you to make an MP4 video when you start the recording. You can then save this file to the IFP and transport it to a USB Drive or Cloud Drive in the MP4 format for viewing on any system.
